- 100% acrylic primer that provides strong sealing properties to a variety of interior & exterior surfaces
- Easy to apply
- Powerful adhesion and stain blocking properties
- Quick drying; topcoat in as little as one hour
- Provides a mildew resistant coating
- Apply when surface and ambient temperature is above 40 °F (4 °C) and below 90 °F (32 °C)
- 400 ? 450 square foot coverage per gallon
- Not recommended for use on floor surfaces
From the manufacturer
Quality Coverage for a Variety of Surfaces
Quality Coverage for a Variety of Surfaces
Remove any light switches and outlet covers before you get started. You can use a 2-inch angled brush for hard to reach places.
For hard to clean surfaces, use a scrubbing pad or brush. Then apply primer with a fine nap roller, brush or spray.
Caulk and seal any cracks before priming.
Remove tiles from the ceiling and paint on a horizontal surface. Replace only when fully dried.
Power wash the surface to remove dirt and debris and allow to dry before priming.
Before priming, repair any missing or damaged mortar. Use a wire brush to thoroughly clean. Then use a 1/2 inch nap roller to apply the primer.
